Somali Standards Catalogue.

Adopts EAS 120-1:2006·EAS

This standard is applicable to lead- acid batteries with a nominal voltage of 12 V. used primarily as a power source for the starting of internal combustion engines, lighting and also for auxiliary equipment of internal combustion engine vehicles. These batteries are commonly called "starter batteries". Batteries with a nominal voltage of 6 V are also included within the scope of this standard. All referenced voltages have to be divided by two for 6 V batteries: This standard is applicable to batteries for the following purposes: batteries for passenger cars; batteries for commercial and industrial vehicles for normal use; and batteries for commercial and industrial vehicles for severe use. This standard is not applicable to batteries for other purposes, for example, the starting of railcar internal combustion engines.

Adopts EAS 120-2:1999·EAS

This East African Standard is applicable to lead-acid batteries used for starting, lighting and ignition of passenger automobiles and light commercial vehicles with a nominal voltage of 12 V fastened to the vehicles by means of ledges on the long sides of the battery case (standard fastening). Since other methods of fastening the batteries are at present in use, two alternative admissible means are also specified.The object of the present standard is to specify; the main dimensions of starter batteries of four standard series; the location of the positive and negative terminals with respect to the fastening system; the dimensions of tapered terminals of starter batteries; and the marking of the polarity

Adopts EAS 178-1:2007·EAS

This East African Standard specifies requirements for plain flexible conduits, made of PVC material, or any other suitable material .The conduits are intended for the mechanical protection of insulated electrical conductors, where flexibility during use is required. It specifies all the internationally agreed sizes up to 50 mm diameter

Adopts EAS 178-2:2007·EAS

This Part 2 of this East African Standard specifies requirements for flexible corrugated conduits of insulating materials. The conduits are intended for the mechanical protection of insulated electrical conductors, where flexibility during use is required. The standard specifies all the internationally agreed sizes up to 50 mm diameter

Adopts EAS 495-1:2008·EAS

This East African Standard gives guidance on the design, specification, installation and commissioning of incineration plant for the destruction of hospital waste. It also gives information on training of staff and maintenance of plant, on collection and transports of hospital waste.

Adopts EAS 495-2:2008·EAS

This part of this East African Standard specifies requirements for 13 A fused plugs having insulating sleeves on line and neutral pins, for household, commercial and light industrial purposes, with particular reference to safety in normal use. The plugs are suitable for the connection of portable appliances; sound-vision equipment, luminaries, etc in ac circuits only, operating at voltages not exceeding 250 V r.m.s. at 50 Hz. using plugs in accordance with EAS 495-1. Requirements are specified for 13 A shuttered socket-outlets in single or multiple arrangements with or without associated controlling switches, for flush mounting in suitable boxes, e.g. complying with EAS 203, or for surface or panel mounting or for portable use. Fixed socket-outlets are intended for use with cables complying with IEC 60227 having copper conductors. Portable socket-outlets are intended for use with flexible cords, complying with EAS 117-1. Socket- outlets containing devices other than fuse links, switches and indicator lamps are outside the scope of this part of EAS 495.

Adopts EAS 495-3:2008·EAS

This part of EAS 495 specifies requirements for adaptors having insulating sleeves on the line and neutral plug pins and suitable for use with socket-outlets complying with EAS 495-2, with particular reference to safety in normal use. Adaptors specified in this part of EAS 495 are intended for household, commercial and light industrial purposes. The adaptors are suitable for the connection of portable appliances, sound-vision equipment, luminaires, etc., in a.c. circuits only, operating at voltages not exceeding 250 V r.m.s. at 50 Hz. Assemblies comprising a plug and one or more portable socket- outlets connected together by a flexible cord or cable are not considered to be adaptors according to this part of EAS 495. Devices incorporating switches, transformers, timers, thermostats or other control means are outside the scope of this part of EAS 495.

Adopts EAS 495-4:2008·EAS

This part of EAS 495 specifies requirements for 13 A fused fixed connection units for household, commercial and light industrial purposes, with particular reference to safety in normal use. The connection units are suitable for the connection of appliances, in a.c. circuits only, operating at voltages not exceeding 250 V r.m.s at 50 Hz. Requirements are specified for connection units incorporating a fuse-link complying with EAS 496. Requirements are specified for 13 A connection units with or without associated controlling switches, for flush mounting in suitable enclosures, e.g. boxes complying with EAS 203, or for surface or panel mounting. Connection units are intended for use with cables complying with IEC 60227 having copper conductors. Connection units with card outlets are additionally intended for use with flexible cords, complying with EAS 117-1 on the load (output) side. Connection units containing devices other than fuse-links, switches and indicator lamps are outside the scope of this standard.

Adopts EAS 496:2008·EAS

This East African Standard specifies dimensions and performance requirements for general purpose cartridge fuse links of current ratings not exceeding13 A for domestic and similar purposes (primarily for use in plugs complying with the requirements of EAS 495) on declared supply voltages not exceeding 250 V (see 4.5) at a nominal frequency of 50 Hz or 60 Hz. It does not cover fuse bases or fuse holders for use with these fuse links.

Adopts EAS 1064-1:2022·EAS

This East African standard covers the energy efficiency and functional performance requirements, sampling and test methods for general service lamps and tubular lamps.

Adopts EAS 1064-2:2022·EAS

This East African standard covers the energy efficiency and functional performance requirements, sampling and test methods for luminaires namely indoor ambient luminaires and outdoor / streetlight luminaires.